Get a Quote 0800 432 0267
Quartz Worktops Granite Worktops Porcelain Worktops
£510.00 per sq/m
Was £566.67
Measure the length (mm) & width (mm) of each worktop piece that you require and input them into the boxes.
Also include any breakfast bars, island units etc. Based on 30mm thickness.
Measurements need to be in mm. 1 metre = 1000mm
mm
x
Total Area
sq/m
These are the edges of the worktop that will be visible and will need polishing.
Based on straight edge polish with chamfer.
These are the cut-outs for under mounted sinks etc. that require the inner exposed edges to be polished because they will be visible
These are the cutouts with an unfinished inner edge that will not be visible, i.e. for hobs and surface mounted sinks etc.
These are the cut-outs for taps and switch holes, i.e. waste disposal.
(1 Set = 5 Grooves)
These are five straight grooves (1 set) in the worktop at one side of the sink which act as a draining board.
These can be used instead of tiling the walls. Measure the total length of upstands required.
Quote based on 100mm high 20mm thickness granite.
This is the panel which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splashbacks which are positioned on top of the work surface to the underside of the wall units.
Measure the length (mm) and width (mm) of each splashback piece that you require and input them into the boxes. Quote based on 20mm thickness.
Would you like to receive a free sample? Please ensure that your details are correct below.
Address
Name
Postcode
Daytime Tel
Mobile Tel
E-mail Address
Where are you buying your kitchen from? Please SelectBenchmarxB&QMagnetWrenIndependentExistingHowdensOtherNot Sure
Please note we do not pass your information on to any third parties
0800 432 0267
Monday to Friday 9am - 6pm
Saturday 9am - 5pm
Our brand ambassador, TV Presenter Jonnie Irwin Click hereOur brand ambassador, TV Presenter Jonnie Irwin Click here
